Applications：

• ● The Winstat BF-X2ZB-V2 Benchtop Ionizer is a small profile, lightweight unit that removes static in a wide range of applications especially in the Electronics and Medical Device Manufacturing Process.
• ● The BF-X2ZB-V2 blower can be placed on a workbench, or it can also be used as a process tool and mounted above a conveyor line, or in a tight production area to effectively remove static charges wherever ESD (Electrostatic discharge) material-handling problems occur.

Specifications：

• ● Power-supply voltage：Accessory AC adapter input：100 V to 240V AC, 50/60Hz

＞AC adapter output DC 24V

• ● Capacity：10VA
• ● Discharge Method：High frequency AC method
• ● High voltage output：3,000V approx.
• ● Ion balance (NOTE1)：±10 V or less
• ● Static charge removal time (NOTE1)：1.5 sec. approx.
• ● High voltage abnormality (ALARM) Output：MOS FET relay output

• ● Maximum allowed current：100 mA
• ● Applied voltage：DC30 V or less
• ● Cleaning check (C.C) output:MOS FET relay output
• ● Maximum allowed current：100 mA
• ● Applied voltage：DC30 V or less
• ● Airflow：Low speed：57cfm / high speed：116cfm
• ● Air flow out angle：Vertically 360° variable (per 10 degrees)
• ● Quantity of produced ozone：0.04 ppm or less(at the center of the fan outlet [150 mm])
• ● Ambient temperature：0 to 40°C
• ● Ambient humidity：15 to 65% (No condensation allowed )
• ● Dimensions：(mm) 6”W×7.1”H×2.7”D (Main Unit only)
• ● Weight：1.8 lbs. (including stand)
• ● Material Enclosure：ABS, Discharge needles：Tungsten, Stand：SECC
• ● Accessories：Instruction manual, AC adapter (NOTE2), Wide-angle louver, Signal output connection wire, Cleaning brush
• ● Note1：Typical value at a distance of 300 mm from the center of the fan outlet, at maximum flow rate.(before shipment)
• ● Note2：The power cable supplied with AC adapter is 125V rated power voltage.

Static Eliminators / Ionizing Blowers / Contamination Control