Features：

• ● The ZappAURA-II is an air nozzle ionizer incorporating an ultra-small-size high-voltage transformer without any high-voltage wiring. Since it operates only on DC power input, its wiring has become much simpler.
• ● Emitter needle：Easy maintenance with compact detachable module with safety control.
• ● H.V. Alarm：When High voltage shut down, it alarm with signal output as NC or NO contact.
• ● Cleaning Check：Detected by emitter abnormal discharge, it shows alarm with LED light and output signal.
• ● Special Tungsten Emitter：Installed long life Tungsten Emitter
• ● NEW!：Installed Ozone resistant air fitting and Optional Nozzles for long life. With Detachable module, it makes easy maintenance for cleaning the emitter. SSD safety control circuit performs sensitive discharging static and controlling contamination.

Specifications：

• ● Discharge Method：High frequency AC corona discharge method
• ● Power-supply voltage：24 V DC ± 10%
• ● Capacity：2.4 VA
• ● High voltage output：2,500 V approx.
• ● Applicable fluid：Air (dried clean air)
• ● Air pressure range：7 to 87 psi (0.05 to 0.60 MPa) (NOTE1)
• ● Supplied air flow：1.76 to 14.12 cfm (50 to 400 lpm)
• ● Dimensions：(mm) 86.5 x 18 x 50 mm (W x H x D) (Main Unit only)
• ● Weight：78 g approx. (Main Unit only)
• ● Environment Indoor, Altitude up to 2000 m
• ● Ambient temperature：32 to 104°F (0 to 40 °C)
• ● Ambient humidity：65 % or less (No condensation allowed)
• ● Attach an air tube：Outside diameter of Φ6 mm
• ● High voltage abnormality NPN and photo relay output / Maximum allowed current：100 mA
• ● (ALARM) Output Applied voltage：30 V DC or less
• ● Cleaning check：NPN and photo relay output Maximum allowed current：100 mA
• ● (C.C) output Applied voltage：30 V DC or less
• ● Discharge stop signal Discharge OFF：Short-circuited to 0 V
• ● (HV-OFF) input Discharge ON：Open (Residual voltage: 0.5 V or less)
• ● Quantity of produced ozone：0.05 ppm or less (Measured Distance 300mm)
• ● Ion balance (NOTE2)：±15 V or less
• ● Material Enclosure：PBT, Cover：Stainless, Discharge needle：Tungsten
• ● Accessories：Instruction manual, Power supply and signal cable
• ● NOTE1. The nozzle was used with ANS (ANS-US). The applicable pressure range depends on the nozzle to be used. Check that the table below.
• ● NOTE2. Measured value when using the nozzle ANS (ANS-US). (before shipment)

Certification：CE

Brand：SCI

Static Eliminators / Particulate Removal